- Handling Tool
- Fishing tool
- Mud pump
- Solid Control
- Well Control
- workover Rigs
- Special vehicles
- Drill string
- Pumping Unit
Model ZQ203/100 Drill Pipe Power Tong
- Type:Power Tong
- CAS No:
- Qty in 20' FCL:
- Min. Order:
3 1/ 2" ～5 1/ 2" Drill Pipe Joints, 8" Drill Collar, 7" and below casing
Torque Range @2320PSI / 16 MPa
High：5166 ft·lbs/ 7000 N·m
Low：73800 ft·lbs/ 100000 N·m
Max RPM @30GPM / 114 LPM
2320 PSI @30 GPM / 16 MPa @114 LPM
73~131 PSI / 0.5~0.9 MPa
59″ /1.5 m
Overall Dimension (L×W×H)
67″×40″×55″/ 1700×1000×1400 mm
5291 lbs / 2400 kg
This tong simplifies hydraulic system because only hydraulic motor uses hydraulic power, other
parts use compressed air.
Upper tong integrates with lower tong to avoid twisting drill pipe in big torque operation and to
prevent it slipping in neck.
Workers operate it very convenient for shifting gear without power off.
Automatic centralizing clamping mechanism can clamp new and old tool joint reliably.
Air cylinder can push or pull this tong, saving labor’s force.
Resetting and aligning the opening is convenient. Changing makeup to breakout is quick and
Torque and speed can be controlled. It can get the biggest torque and the highest speed in
clockwise or counter-clockwise.
The clamping structure is simple. The clamping of upper tong and lower tong is accomplished by
braking band and clamping cylinder respectively. Safety door can avoid tong head deforming in big
torque operation (70-100 kN.m.).